gd55光大彩票

gd55光大彩票1、 Equipment name: internal and external brush barrel cover pulling machine

gd55光大彩票2、 Specification and model: hdnbs-1

3、 Equipment brand: Wenzhou Haineng wzhdn

4、 Product Description:

gd55光大彩票In order to meet the needs of the majority of mineral water plants and pure water plants, the tedious empty barrel treatment process is changed into simple automation. This paper introduces and absorbs the advanced technology of brush barrel and cover removal at home and abroad, and develops the brush barrel and cap pulling machine combined with the actual situation of existing manufacturers and the management requirements of drinking water industry. The equipment has reliable performance, simple operation and convenient maintenance. 　

gd55光大彩票5、 Product features:

◇ Set brush, internal washing, external washing in one, three working states in the same cycle, saving time, labor and power.

◇ Water supply mode: users can choose circulating water supply mode, non circulating water supply mode and compound water supply mode according to their needs.

◇ The machine is suitable for all-round effective brushing of the inner and outer walls of the barrel.

gd55光大彩票◇ The operation is simple, and the whole brushing process can be completed only by opening and closing the door.

◇ Pay attention to the power supply mode of the machine. N is the zero line. After the power is connected, the water tank is filled with water and the rotation direction of the motor is confirmed. Then turn on the power switch of the panel, and then open the flip cover to test run.

◇ The machine is suitable for separating the lid and barrel of 3-gallon and 5-gallon drinking water recovery barrels. The separated end has no wear and deformation, and can be reused after disinfection, which improves the utilization rate of the end. This machine is powered by air pressure, safe and reliable. The rated air supply pressure is 0.5mpa/cm ~ 2, the air intake volume is ≥ 0.1m3/min, and the capping rate is 200 ~ 300pcs / h. Turn on the air source, put the recycling bucket upside down, insert the bucket mouth into the cover pulling head, and then step on the foot switch to pull out the bucket cover and slide out of the chute.

It is used for bottle washing and capping of barreled mineral water and purified water production line.

7、 Product parameters:

gd55光大彩票1. Brush: 8 (inside, outside, up and down)

2. Number of capping heads: 1

3. Number of brush heads: 1

gd55光大彩票4. Suitable for barrel size of 5 Gal (270 × 490 × 56mm)

5. Treatment rate: 150-280 B / h

6. Rated voltage: three phase four wire / 380V

7. Total motor power: 1.1kw

8、 Maintenance:

gd55光大彩票1. One month after the new machine is used, the tightness of the main longitudinal belt and the distance of the threshold should be adjusted properly.

2. Every time you start to brush the bucket, fill the water tank with water first.

3. Check the cleaning of the cover pulling head and whether the connecting screws between the cover pulling head and the cylinder are loose.

gd55光大彩票4. In the process of use, it is found that some covers can not be pulled out, which may be due to the abnormal size of the barrel diameter. At the same time, pay attention to the air source pressure.

5. In the process of removing the cover, do not put your hand into the cover pulling head to avoid being pulled by the cylinder.

1. The system equipment enjoys one-year free warranty, and the warranty date is calculated from the date of product acceptance, and consumable filter materials are not included.
2. In case of equipment quality problems (except caused by misoperation or unforeseen factors) within the warranty period, the supplier shall repair the equipment free of charge and be responsible for replacing the damaged parts.
3. After the expiration of the warranty period, only a certain amount of material fee and appropriate technical service fee will be charged.
4. In case of system failure, which cannot be solved by itself or by telephone, our technical maintenance personnel shall make solutions (including temporary measures) and schedule within 24 hours after receiving the written notice from the demander, and report to the competent leaders of both parties.
5. After the delivery of the equipment, our company will have engineers to pay a return visit to understand the operation of the equipment and provide technical services in a timely manner. We welcome any technical questions and we will reply in time.

(1) The user shall provide the detailed data of raw water test, so that our company can carry out relevant selection and arrangement calculation.
(2) The user shall explain the water quality requirements, use and water yield.
(3) Our company has a variety of pressure vessels, membranes, accessories, etc. if the user gives special instructions, we will try our best to meet the requirements.
(4) Our company provides installation and debugging for the designed and sold equipment and training for users' operation personnel.
(5) Our company implements the principle of one-year warranty and life-long service for users, establishes files and provides tracking service to ensure the quality level.

If the above-mentioned equipment fails to meet your requirements, please contact us. We will formulate detailed engineering scheme according to your actual situation to realize low-cost, high-efficiency and scientific process combination, so as to make water production meet your ideal requirements.